As counterintuitive as it may sound, start by clicking the “Lock” button once Android Device Manager gets a fix on your device. If the service is having trouble finding your device, click your browser’s refresh button a few times, and it should make the connection within 5 attempts if your phone is compatible.
After clicking the “Lock” button, you’ll be prompted to enter a new password, which will replace the pattern, PIN, or password that you forgot. Type the new password twice to confirm your choice, then click the “Lock” button.
From here, it can take up to 5 minutes for the password to change over, but when it does, you should be able to enter the new password to unlock your device.
Method 2Use Samsung’s ‘Find My Mobile’ Service
If you have a Samsung device, a similar service called Find My Mobile should be the first thing you try. Start by heading to this link from any web browser, then log into your Samsung account. If you never set up a Samsung account, this method will not work, unfortunately. Also, some carriers, like Sprint, lock out this service, which is something to keep in find.
Once you’ve logged into your Samsung account, click the “Lock my screen” button in the left-hand pane. From here, enter a new PIN in the first field, then click the “Lock” button near the bottom of the screen. Within a minute or two, your lock screen password should be changed to the PIN you just entered, which you can use to unlock your device.
Method 3Use the ‘Forgot Pattern’ Feature
If your device is running Android 4.4 or lower, try using the “Forgot Pattern” feature. After 5 failed unlock attempts, you’ll see a message that says “Try again in 30 seconds.” While this message is showing, tap the button at the bottom of the screen that says “Forgot Pattern.”
From here, choose “Enter Google account details” (depending on your device, you may go directly to this option), then enter your primary Gmail account and password. Google will either send you an email with your unlock pattern, or you can change it right then and there.
Method 4Perform a Factory Reset
If you’re more concerned with getting into your phone than you are with preserving any data stored on it, a factory reset should work in almost any scenario.
The process will vary depending on your device type, but for most phones, start by powering the device completely off. When the screen goes black, press and hold the volume down and power buttons simultaneously, which will bring up Android’s bootloader menu. From here, press the volume down button twice to highlight the “Recovery mode” option, then press the power button to select it.
Next, hold the power button down and tap the volume up button once, then your phone should enter recovery mode. From here, use the volume buttons to highlight the “Wipe data/factory reset” option, then press the power button to select it. When the process is finished, select the “Reboot system now” option and you should no longer be locked out of your phone.
Method 5Use ADB to Delete the Password File
This next option will only work if you’ve previously enabled USB debugging on your phone, and even then, it will only work if you’ve allowed the computer you’re using to connect via ADB. But if you meet those requirements, it’s a perfect way to unlock your device.
Start by connecting your phone to your computer with a USB data cable, then open a command prompt window in your ADB installation directory. From here, type the following command, then hit Enter.
adb shell rm /data/system/gesture.key
Next, reboot your phone and the secure lock screen should be gone, allowing you to access your phone. But this is only temporary, so make sure to set a new pattern, PIN, or password before you reboot again.
Method 6Boot into Safe Mode to Bypass Third-Party Lock Screen
If the lock screen you’re trying to bypass is a third-party app rather than the stock lock screen, booting into safe mode is the easiest way to get around it.
For most phones, you can boot into safe mode by bringing up the power menu from the lock screen, then long-pressing the “Power off” option. From here, choose “OK” when asked if you’d like to boot into safe mode, and when the process finishes, your third-party lock screen app will be temporarily disabled.
From here, simply clear data on the third-party lock screen app or uninstall it, then reboot your phone to get back out of safe mode. When you get back up, the troublesome lock screen app should be gone.
Method 7Crash the Lock Screen UI
Finally, if your device is encrypted and running Android 5.0-5.1.1, there’s a way to get around the password lock screen. This method won’t work on any other type of secure lock screen, but it’s a lifesaver if you forgot your password.
First, tap the “Emergency Call” option on your lock screen, then use the dialer interface to enter 10 asterisks. From here, double-tap the field to highlight the entered text and choose “Copy,” then paste it into the same field to essentially double the amount of entered characters. Repeat this same process of copying and pasting to add more characters until double-tapping the field no longer highlights the characters.
Next, head back to the lock screen and open the camera shortcut. From here, pull down the notification shade and tap the Settings icon, then you’ll be prompted to enter a password. Long-press the input field and choose “Paste,” then repeat this process several more times. Eventually, after you’ve pasted enough characters into the field, your lock screen will crash, which will allow you to access the rest of your phone’s interface.
Prerequisites Kali Linux Prior experience with wireless hacking You will also need to install a tool (bridge utils) which doesn't come pre-installed in Kali. No big deal- apt-get install bridge-utils Objectives The whole process can be broken down into the following steps- Finding out about the access point (AP) you want to imitate, and then actually imitating it (i.e. creating another access point with the same SSID and everything). We'll use airmon-ng for finding necessary info about the network, and airbase-ng to create it's twin . Forcing the client to disconnect from the real AP and connecting to yours. We'll use aireplay-ng to deauthenticate the client, and strong signal strength to make it connect to our network. Making sure the client doesn't notice that he connected to a fake AP. That basically means that we have to provide internet access to our client after he has connected to the fake wireless network. For that we will need to have i...
Cloning a card: Sim cards are manufactured on the basis of 3 algorithms COMP128v1,COMP128v2 and COMP128v3 now an important note currently only COMP128v1 version sim cards can be cloned ,since this is the only algorithm which has been cracked by users, bear in mind that 70% of all the sim cards we use are COMP128v1 . 1. Buy a SIM card Reader 2. Need a Blank SIM card or super SIM card 3. Download and install MagicSIM 4. Download and install USB SIM Card Reader Software 3.0.1.5 6. Go in phone tools, select SIM card, then select unlock SIM, it will prompt for a code. 7 Call network provider, they will ask for your phone number, your account info, name and security code, then they will ask why you want to unlock your SIM card, just tell them you need to unlock your SIM to get it to work with your overseas phone or something. 8. Once they give you the SIM unlock code, enter it, and it will say SIM unlocked. 9. Remove the SIM from your phone, place it in the card...
Comments
Post a Comment